| Index Entry | Section |
|---|
|
| J | | |
|---|
| Jeremy Bennett | Contributors to GDB for the OpenRISC 1000 |
| Johan Rydverg | Contributors to GDB for the OpenRISC 1000 |
| JTAG | Summary of GDB with OpenRISC 1000 |
| JTAG, OpenRISC 1000 interface | Contributors to GDB for the OpenRISC 1000 |
| JTAG, remote connection robustness | 4. Known Problems |
| JTAG, robustness or remote interface | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| jtag, target | Summary of GDB with OpenRISC 1000 |
|
| K | | |
|---|
| known problems | 4. Known Problems |
| known problems, architectural compatability | 4. Known Problems |
| known problems, Or1ksim architectural simulator | 4. Known Problems |
| known problems, Or1ksim architectural simulator | 4. Known Problems |
| known problems, remote JTAG connection robustness | 4. Known Problems |
| known problems, watchpoints | 4. Known Problems |
|
| L | | |
|---|
| local OpenRISC 1000 target, connecting | 1. Connecting to an OpenRISC 1000 Target |
| local OpenRISC 1000 target, connecting | 1.1 Direct connection via a JTAG JP1 Interface |
| local target jtag command | 1.1 Direct connection via a JTAG JP1 Interface |
| local target specification | 1.1 Direct connection via a JTAG JP1 Interface |
|
| M | | |
|---|
| Mark Mlinar | Contributors to GDB for the OpenRISC 1000 |
| Mlinar, Mark | Contributors to GDB for the OpenRISC 1000 |
| Mohor, Igor | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
|
| O | | |
|---|
| OpenRISC 1000 Architectural Simulator | 1. Connecting to an OpenRISC 1000 Target |
| OpenRISC 1000 Architectural Simulator, configuration | 3. A Small Example |
| OpenRISC 1000 Architectural Simulator, patch | 1. Connecting to an OpenRISC 1000 Target |
| OpenRISC 1000 JTAG interface | Contributors to GDB for the OpenRISC 1000 |
| OpenRISC 1000 specific commands | Summary of GDB with OpenRISC 1000 |
| OpenRISC 1000 target, connecting | 1. Connecting to an OpenRISC 1000 Target |
| OpenRISC 1000 target, direct connecting | 1. Connecting to an OpenRISC 1000 Target |
| OpenRISC 1000 target, direct connecting | 1.1 Direct connection via a JTAG JP1 Interface |
| OpenRISC 1000 target, local connecting | 1. Connecting to an OpenRISC 1000 Target |
| OpenRISC 1000 target, local connecting | 1.1 Direct connection via a JTAG JP1 Interface |
| OpenRISC 1000 target, remote connecting | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| OpenRISC 1000 target, remote connecting via JTAG | 1. Connecting to an OpenRISC 1000 Target |
| OpenRISC 1000 target, remote connecting via RSP | 1. Connecting to an OpenRISC 1000 Target |
| OpenRISC 1000 target, remote connecting via RSP | 1.2 Connection via the GDB Remote Serial Protocol |
| OpenRISC 1000, custom commands | 2. Commands just for the OpenRISC 1000 |
| OpenRISC 1000, known GDB problems | 4. Known Problems |
| Or1ksim | 1. Connecting to an OpenRISC 1000 Target |
| Or1ksim, bugs fixed | 4. Known Problems |
| Or1ksim, bugs fixed | 4. Known Problems |
| Or1ksim, configuration | 3. A Small Example |
| Or1ksim, patch | 1. Connecting to an OpenRISC 1000 Target |
| Overview | Summary of GDB with OpenRISC 1000 |
|
| P | | |
|---|
| patch, OpenRISC 1000 Architectural Simulator | 1. Connecting to an OpenRISC 1000 Target |
| patch, Or1ksim | 1. Connecting to an OpenRISC 1000 Target |
| Per Bothner | Contributors to GDB for the OpenRISC 1000 |
| program loading | 3. A Small Example |
| program loading, example | 3. A Small Example |
| program loading, remote | 3. A Small Example |
|
| R | | |
|---|
| remote JTAG, connection robustness | 4. Known Problems |
| remote OpenRISC 1000 target, connecting | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| remote OpenRISC 1000 target, connecting via JTAG | 1. Connecting to an OpenRISC 1000 Target |
| remote OpenRISC 1000 target, connecting via RSP | 1. Connecting to an OpenRISC 1000 Target |
| remote OpenRISC 1000 target, connecting via RSP | 1.2 Connection via the GDB Remote Serial Protocol |
| remote program loading, example | 3. A Small Example |
| remote program restart | 3. A Small Example |
| remote program termination | 3. A Small Example |
| Remote Serial Protocol | Summary of GDB with OpenRISC 1000 |
| Remote Serial Protocol | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| remote target jtag command | 1.2 Connection via the GDB Remote Serial Protocol |
| remote target jtag command | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| remote target remote command, example | 3. A Small Example |
| remote target specification | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| remote target specification for RSP | 1.2 Connection via the GDB Remote Serial Protocol |
| remote target specification via RSP, example | 3. A Small Example |
| remote target specification, same machine | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| remote target specification, same machine for RSP | 1.2 Connection via the GDB Remote Serial Protocol |
| Reporting bugs | 4. Known Problems |
| reset | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| resetting the target | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| restart, remote program | 3. A Small Example |
| robustness, OpenRISC remote JTAG interface | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| RSP | Summary of GDB with OpenRISC 1000 |
| RSP | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| Rydverg, Johan | Contributors to GDB for the OpenRISC 1000 |
|
| S | | |
|---|
| set command example | 3. A Small Example |
| Special Purpose Registers | Summary of GDB with OpenRISC 1000 |
| SPR | Summary of GDB with OpenRISC 1000 |
| spr command | Summary of GDB with OpenRISC 1000 |
| spr command | 2. Commands just for the OpenRISC 1000 |
| spr command | 2.2 Using the spr Command |
| spr command, argument specification | 2.2 Using the spr Command |
| step command example | 3. A Small Example |
| Summary | Summary of GDB with OpenRISC 1000 |
| symbol file loading | 3. A Small Example |
| symbols when remote debugging | 3. A Small Example |
|
| T | | |
|---|
| target extended-remote command | 1. Connecting to an OpenRISC 1000 Target |
| target jtag | Summary of GDB with OpenRISC 1000 |
| target jtag command | 1. Connecting to an OpenRISC 1000 Target |
| target jtag command | 1. Connecting to an OpenRISC 1000 Target |
| target jtag command, direct | 1.1 Direct connection via a JTAG JP1 Interface |
| target jtag command, direct, testing | 1.1 Direct connection via a JTAG JP1 Interface |
| target jtag command, local | 1.1 Direct connection via a JTAG JP1 Interface |
| target jtag command, local, testing | 1.1 Direct connection via a JTAG JP1 Interface |
| target jtag command, remote | 1.2 Connection via the GDB Remote Serial Protocol |
| target jtag command, remote | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| target remote command | 1. Connecting to an OpenRISC 1000 Target |
| target remote command, remote, example | 3. A Small Example |
| target reset | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| target specification for RSP | 1.2 Connection via the GDB Remote Serial Protocol |
| target specification for RSP, same machine | 1.2 Connection via the GDB Remote Serial Protocol |
| target specification, direct | 1.1 Direct connection via a JTAG JP1 Interface |
| target specification, local | 1.1 Direct connection via a JTAG JP1 Interface |
| target specification, remote | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| target specification, remote via RSP, example | 3. A Small Example |
| target specification, same machine | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| target, direct, OpenRISC 1000, connecting | 1. Connecting to an OpenRISC 1000 Target |
| target, direct, OpenRISC 1000, connecting | 1.1 Direct connection via a JTAG JP1 Interface |
| target, local, OpenRISC 1000, connecting | 1. Connecting to an OpenRISC 1000 Target |
| target, local, OpenRISC 1000, connecting | 1.1 Direct connection via a JTAG JP1 Interface |
| target, OpenRISC 1000, connecting | 1. Connecting to an OpenRISC 1000 Target |
| target, remote, OpenRISC 1000, connecting | 1.3 Connection via the OpenRISC 1000 Remote JTAG Interface |
| target, remote, OpenRISC 1000, connecting via JTAG | 1. Connecting to an OpenRISC 1000 Target |
| target, remote, OpenRISC 1000, connecting via RSP | 1. Connecting to an OpenRISC 1000 Target |
| target, remote, OpenRISC 1000, connecting via RSP | 1.2 Connection via the GDB Remote Serial Protocol |
|